Jeep Grand Cherokee WK2 3D-printable parts

Pair of front license-plate brackets for a 2015 Grand Cherokee WK2 lower grille. Each bracket accepts a plate screw and fastens to the mesh with a zip tie, avoiding drilled holes; the creator documents the exact mounting location.

Clip-on guard for the Selec-Terrain drive-mode control in 2011–2021 Grand Cherokee WK2 center consoles. It prevents pets or cargo from pressing the control while preserving intentional access.

Protective ring for the power-seat lumbar switch used in 2011 and 2014 Grand Cherokee WK2 interiors. It prevents accidental adjustment while reaching into the vehicle and mounts around the existing control with double-sided tape.

Replacement center-console storage bin for a 2019 Grand Cherokee WK2 without Selec-Terrain. It recesses and supports a REDARC trailer-brake remote knob without drilling the dashboard; the corrected revision 2 file is selected and the creator documents the installed assembly.

Two-piece cross divider for the standard, non-locking center-console bin. The creator physically verified it in 2021 and 2022 Grand Cherokee consoles; the selected version 3 adds beveled lower corners and supersedes the hand-sanded version 2.

Replacement body aperture plug for Grand Cherokee WK2 sheet-metal openings, modeled specifically as a substitute for the factory Mopar plug.

Reinforced hand wrench for removing and installing the H11 headlight bulb in a 2015 Grand Cherokee WK2's confined lamp housing. The selected version is the physically tested hand-tool geometry; the source warns that the bulb turns only one quarter turn.

Replacement cargo hook modeled for a 2013 Grand Cherokee WK2 luggage area.

Replacement internal gear for the air-conditioning actuator in a 2011 Grand Cherokee WK2. The printable geometry reproduces the failed compound gear and keyed center bore.

Protective fitted sleeve for the key fob used with 2014 and 2016 Grand Cherokee WK2 vehicles. The creator documents the physical print around the complete fob.