Tools — 3D-printable Jeep parts

Replacement key/tool for operating the Jeep Renegade MySky removable roof panel. Minor filing may be needed to tune the fit for a particular printer.

Reinforced hand wrench for removing and installing the H11 headlight bulb in a 2015 Grand Cherokee WK2's confined lamp housing. The selected version is the physically tested hand-tool geometry; the source warns that the bulb turns only one quarter turn.

Socket-style service wrench for the 74.5 mm, 14-flute oil-filter housing used by the 2007–2008 Grand Cherokee WK and WH with the 3.0L CRD diesel engine. The creator designed it from measured filter geometry and documented a physical test print.

Replacement fuse-puller tool stored at the Grand Cherokee WJ and WG fuse panel. The source documents both the factory storage position and the printed replacement.

Socket tool for removing the lower outer headlight adjuster on 1993–1998 Grand Cherokee ZJ assemblies.

Hand tool for releasing the fuel-line quick connector on a 2005 Cherokee KJ or Liberty KJ.

Purpose-built wrench for removing a seized Cherokee XJ fuel-pump retaining ring without striking the ring with a hammer and screwdriver.

Two-piece puller for removing a seized AW4 automatic-transmission neutral-safety switch without prying on it. It uses an M8 nut and bolt to draw the switch from its shaft.

Eight-millimeter gauges used when manually calibrating Freedom-panel position on Wrangler JL, JLU, and Gladiator JT roofs.

Service tool for removing a stubborn Wrangler JL wiper arm before folding the windshield. It uses a standard 1/4-inch bolt and nut.

Reinforced 24 mm socket for the Pentastar oil-filter housing used in Wrangler JK models. This V2 geometry accepts either a 3/8-inch or 1/2-inch drive; the creator tested the earlier PLA version to the 25 N·m service torque.

Hand wrench for loosening and tightening Wrangler JK Freedom-panel knobs without straining fingers. Two grip profiles are included.

Protective clips that snap over the lower edges of removed TJ doors before they are set on concrete or sand.